DAT8050 Loop Powered LED indicator.
Datexel, specializing in signal conditioning and loop powered devices would like to present the DAT8050 loop powered LED panel indicator. This LED loop powered meter has 4 digits and is able to indicate readings up to 9999.
It is programmable to any range by the use of the buttons on the front panel.
It is possible to set the indicator to measure in engineering units. In a range from 100 to 9999 points and the zero from -1999 to 9999 and the decimal place is settable. Examples are readings 0-14.00 PH, 0-100.0 % or 0-99.99% and many other combinations.
When the measured current is lower than 3.8 mA, the display will show the message " Lo "; in the same way, when the current measured is higher than 20.2 mA, the display will show the message " Hi ". Next to the display it is possible to apply the desired engineering unit using the adhesive labels supplied with the device.
The DAT8050 is designed to din 43700 standards and the panel cut out is 3 9/16 inch X 1 3/4 inch (90 X 44 mm). The DAT8050 only uses a volt drop of 5 V with accuracy off 0.05%. As it is loop powered it does not need a separate power supply. The housing is made of plastic.