DAT733 Loop Powered Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

DAT733 Loop Powered Indicator.

Datexel, specializing in signal conditioning and loop powered devices would like to present the DAT733 loop powered panel indicator. This LCD loop powered meter has 3 ½ digits and is able to indicate up to readings of 1999. 

It is programmable to any range by the use of dip switches and potentiometers (zero and span).

It is possible to set the indicator to measure in engineering units in a range from 100 to 2000 points and the zero from -1999 to 1999 and then change the decimal place setting. Examples are readings 0-14.00 PH, 0-100.0 % and many other combinations.
There is a separate function that allows the operator to hold the display. This is done by connecting terminal 3 and 4 to a push switch.

The DAT733 is designed to din 43700 standards and the panel cut out is 2 11/16 inch X 1 5/16 inch (68 x 33 mm). The DAT733 only uses a volt drop of 3.5 V with accuracy off 0.1%. As it is loop powered it does not need a separate power supply. The housing is made of plastic.