DAT1065 Isolated Programmable Temperature transmitter.
Datexel, specializing in signal conditioning and temperature transmitters would like to present the DAT1065, an isolated two wire universal transmitter which is PC programmable. The DAT1065 can be programmed to accept thermocouples including J,K,S,R,B,E,T and N. RTD’s including Pt100, Pt1000, Ni100 and Ni1000. It can also be programmed to accept Voltage, Resistance and Potentiometers.
The DAT1065 provides 2000 V isolation between input and output, ideal to stop ground loop problems in heavy environmental conditions found in industrial applications.
The power supply has a high range from 10 to 32 Vdc and at 32 Vdc is able to drive a load of 1000 Ohms. There is a reverse voltage protection up to 60 Vdc. The input and output can be separately linearized to allow the use of all sensors available today.
The DAT1065 is programmable by PC using a USB port and the Prosoft software developed by Datexel. With the use of the Prosoft software it is possible to set the transmitter up in farenheit or centigrade.
The DAT 1065 is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility, meaning it carries the CE Mark.
It is housed in a self-extinguishing plastic enclosure suitable for DIN B in-head mounting. It is possible to mount the DAT 1065 on DIN rail with an optionally available din rail kit.
The unit is available in an DAT1065IS version according to the ATEX standard PROTECTION MODE: II 1 G Ex ia IIC certified in accordance with the Directive ATEX 94/9/EC Applicable in zones with explosion risk (ZONE 0)