DAT411SR Regulated Power supply.
GENERAL DESCRIPTION
The power supply unit DAT411SR is designed to provide a isolated regulated output to power the DATEXEL devices like transmitters and converters.
The device can accept three input voltage values:24, 120 or 230 Vac.
The DAT411SR is in compliance with the standard 89/336/EEC on the Electromagnetic Compatibility.
It is housed in a plastic enclosure of 28 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
USER INSTRUCTIONS
The DAT411SR must be connected as follows:
The input connections must be made as shown in the section "Input connections".
The input voltage ( AC line ) must be applied between the terminals G ( IN AC) and H ( IN AC ).
The output connections must be made as shown in the sections “Output connections”
The output signal is provided between the terminals F (+Vout) and E (GND),
To install the transmitter refer to section “Installation Instructions”.
TECHNICAL SPECIFICATIONS
| Input | |
| Input voltage | 24 Vac ± 10 % @ 50-60 Hz. 120 Vac ± 10 % @ 50-60 Hz. 230 Vac ± 10 % @ 50-60 Hz. |
| Outputs | |
| Output | 20 Vdc @ 55 mA regulated. |
| Load resistance (Rload) | see section “Load characteristic” |
| Environmental data | |
| Safety | EN 61010-1 Electromagnetic Compatibility (EMC) ( for industrial environments) |
| Immunity: | EN 61000-6-2; Emission : EN 61000-6-4. |
| Operating Temperature | -20 ÷ 70 °C |
| Storage Temperature | -40 ÷ 85 °C |
| Humidity (not condensed) | 0 ÷ 90% |
| Weight | about 130 g |
INSTALLATION INSTRUCTIONS
The device DAT411SR is suitable for DIN rail mounting.
It is necessary to install the device in a place without vibrations; avoid to routing conductors near power signal cables .
Dimensions (mm)
Load Characteristic
Connections
Isolation Structure
